Question: Can You Mix 1600 And 1333 Ram?

Is 2133 Mhz RAM good?

You’ll be fine with 2133MHz for most games but for others like Fallout 4 RAM speed is a big deal.

During the DDR3 era, faster RAM used to cost a fortune for little to no returns and it made no sense to buy more than 1600MHz unless you had specific needs (like AMD’s APUs)..

What is the difference between 1600 and 1333 Ram?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Is it OK to mix and match RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.

Can I combine 4gb and 8gb RAM?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Is 3200 Mhz RAM good?

If you have a Ryzen based system 3200 is a sweet spot in terms of performance and will benefit you very well. “Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM.

Can I mix different MHz of RAM?

You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.

Can I use 1066 and 1333 Ram together?

You can mix RAM of both speeds (1066/1333). The system will automatically use the slower speed, but there is no risk of system crashes.

What does ddr3/1600 mean?

DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Is 2 8gb RAM better than 16gb?

Generally it is better to have two 8 GB sticks rather than just a single 16 GB stick from a performance perspective. Most processors these days are dual channel, meaning they perform best with two identical sets of memory and some are even quad channel.

Which RAM is faster 1333 or 1600?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

What is the difference between 1066 and 1333 Ram?

The 1333 stick runs at 21Gb/s and the 1066 stick runs at 17Gb/s. So, there’s a 4 Gb/s loss on each stick used. You may calculate accordingly depending on the number of RAM sticks used.

Is 1600 Mhz RAM fast?

Any machine old enough to USE “1600 Mhz” RAM is going to be marginal on gaming for current high-end titles, but more due to the CPU than the RAM.

Is cl9 better than cl11?

Thus, the CL9 ram was 1% faster memory performance, and 2.6% faster stream performance. I should point out that the CL9 was consistently faster than CL11 on all five passes. There you have it.

What does cl9 mean on RAM?

20. Loading when this answer was accepted… CL = Column Address Strobe Latency, which shows the number of clock cycles that pass from when an instruction is given for a particular column and the moment the data is available.